Centrifugal Pump

Stainless Steel High Suction Head 3HP Closed Impeller Centrifugal Separator for Dairy Indusrty

品牌: JONENG
物料号: LD-776411978

The centrifugal pump is ideal for pumping low or medium viscosity hygienic liquids and slurries, such as milk,juice by converting energy into velocity or kinetic energy and pressure. The open impeller design removes the dead angle which is easier to clean and keep hygienic. The centrifugal pump has the advantage of low cost and high flow so it is the most wide-use pump in the industry.

Stainless Steel High Suction Head 3HP Closed Impeller Centrifugal Separator for Dairy

The pump is consist of casing, impeller, mechanical seal, shaft and motor. The impeller houses in the casing and rotates in conjunction with pump shaft. When the low or medium fluid enters the inlet, the pump will transfer the centrifugal force to generate speed which makes the impeller revolves fast. In this way, the fluid will be pushed through the outlet.

Stainless Steel Lobe Pump Specification Chart

Max. flow rate	130m3/h
Max viscosity	100000Cps
Max pressur	7bar
Power supply	0.75kw to 30kw
Max. temperature	120 °C
Material	SS304/SS316L
Mechanical seal	single mechanical seal/double mechanical seal
Inlet/outlet connection	Thread, Clamp, Flange,Weld,Union
Internal Surface treatment	≤ Ra0.8μm as default
Motor brand	ABB or local motor
Frequency	50HZ/60HZ

Max. flow rate	130m3/h
Max viscosity	100000Cps
Power supply	0.75kw to 30kw
Max. temperature	120 °C
Material	SS304/SS316L
Mechanical seal	single mechanical seal/double mechanical seal
Inlet/outlet connection	Thread, Clamp, Flange,Weld,Union
Internal Surface treatment	≤ Ra0.8μm as default
Motor brand	ABB or local motor
Motor type	variable frequency motor, fixed speed motor
Frequency	50HZ/60HZ
Max. pressure	7 bar
Max. temperature	120°C
Material	SS304/SS316L
Inlet/outlet connection	Clamp, Weld, Flange
Inlet/outlet size	1”-3”
Diaphragm	PTFE, PTFE with white back, EPDM, white EPDM, white NBR
Driving way	Air or Motor