JONENG Sanitary Flow — Главная
RU
Запросить предложение

Ваш список для запроса

Список пуст. Добавьте изделие с его страницы — оно будет ждать вас здесь.

Blogs

How this equipment behaves, and why

Seat materials, surface finishes, cleaning regimes and the failures that follow from getting them wrong — written by the people who answer the phone when one of them fails.

    • Fittings and clamps

    Почему клапаны и фитинги из нержавеющей стали все еще ржавеют? Разве нержавеющая сталь не должна быть «нержавеющей»?

    Краткий ответ: Нержавеющая сталь полагается на чрезвычайно тонкую «пленку оксида хрома» (пассивирующий слой) на своей поверхности для предотвращения ржавчины.

    • Materials
    • 2 мин чтения

    EPDM or PTFE: which seat survives your CIP

    Most seat failures on a sanitary line are not wear. They are the wrong elastomer meeting a cleaning regime nobody described when the valve was bought.

    • Fittings and clamps
    • 3 мин чтения

    Key Differences Between NPT and BSP Pipe Fitting Dimensions

    In brief: Both NPT and BSP are pipe-thread standards, but they use different thread angles. NPT is a U.S. 60° tapered pipe thread, while BSP is a British 55° pipe thread. BSP is further divided into tapered threads (BSPT) and parallel/straight threads (BSPP).

    • Fittings and clamps
    • 4 мин чтения

    Steam Traps: Key Components for High-Purity Steam Piping Systems

    In steam piping systems subject to stringent cleanliness standards, steam undergoes a phase change to form condensate after heat exchange. Air and non-condensable gases are also introduced during system startup, shutdown, and continuous operation.

    • Ball valves
    • 5 мин чтения

    Differences Between Ball Valves And Plug Valves

    Both ball valves and plug valves are 90-degree rotary valves that control pipeline flow by rotating the valve core; they share similar opening and closing mechanisms and are often confused during the selection process.

    • Pumps
    • 4 мин чтения

    Working Principle of Centrifugal Pumps？

    Centrifugal pumps are widely used as fluid transport equipment in piping systems for transferring process fluids in the pharmaceutical, food, and beverage industries.

    • Diaphragm valves
    • 4 мин чтения

    What is the difference between a diaphragm valve and a globe valve?

    The globe valve is a type of lift valve featuring a straight-through inlet and outlet configuration; it regulates flow and controls shut-off through the vertical movement of the valve disc. Available with manual, electric, or pneumatic actuation, it is suitable for use in clean piping systems.

    • Fittings and clamps
    • 4 мин чтения

    What is a stainless steel elbow?

    A stainless steel elbow is a crucial pipe fitting used to alter the flow direction of fluids within a pipeline, typically installed at points where the pipeline turns.

    • Standards
    • 2 мин чтения

    What 3-A actually requires of a valve

    A 3-A symbol on a datasheet is quoted as though it settled everything. It settles less than most specifications assume, and the gap is where the arguments start.