English
简体中文
Español
Français
Português
العربية
Blogs
How this equipment behaves, and why
Seat materials, surface finishes, cleaning regimes and the failures that follow from getting them wrong — written by the people who answer the phone when one of them fails.
-
- Fittings and clamps
Почему клапаны и фитинги из нержавеющей стали все еще ржавеют? Разве нержавеющая сталь не должна быть «нержавеющей»?
Краткий ответ: Нержавеющая сталь полагается на чрезвычайно тонкую «пленку оксида хрома» (пассивирующий слой) на своей поверхности для предотвращения ржавчины.
-
- Fittings and clamps
- 3 мин чтения
Key Differences Between NPT and BSP Pipe Fitting Dimensions
In brief: Both NPT and BSP are pipe-thread standards, but they use different thread angles. NPT is a U.S. 60° tapered pipe thread, while BSP is a British 55° pipe thread. BSP is further divided into tapered threads (BSPT) and parallel/straight threads (BSPP).
-
- Fittings and clamps
- 4 мин чтения
Steam Traps: Key Components for High-Purity Steam Piping Systems
In steam piping systems subject to stringent cleanliness standards, steam undergoes a phase change to form condensate after heat exchange. Air and non-condensable gases are also introduced during system startup, shutdown, and continuous operation.
-
- Fittings and clamps
- 4 мин чтения
What is a stainless steel elbow?
A stainless steel elbow is a crucial pipe fitting used to alter the flow direction of fluids within a pipeline, typically installed at points where the pipeline turns.
-
- Fittings and clamps
- 4 мин чтения
Tri clamp sanitary elbow standard
A Tri-Clamp stainless steel elbow is a pipe fitting that utilizes a clamp connection method, primarily used to change the flow direction of media within a pipeline.
-
- Fittings and clamps
- 4 мин чтения
What surface finish is required for stainless steel elbows?
Although stainless steel elbows possess inherent corrosion resistance, manufacturing processes can result in the formation of oxide layers, oil residues, impurities, and surface defects; therefore, appropriate surface treatment is usually necessary.
-
- Fittings and clamps
- 3 мин чтения
What is the best stainless steel grade for clamps in corrosive environments?
The core principle for selecting stainless steel grades for pipe clamps in corrosive environments is to choose a material with a corrosion rating higher than the environmental corrosion level, based on factors such as the specific corrosive medium, concentration, temperature, and whether welding is
-
- Fittings and clamps
- 2 мин чтения
What are the different connection methods for sanitary stainless steel sight glasses?
There are three main connection methods for sanitary stainless steel sight glasses: quick-release clamp connection, welding connection, and flange connection.
-
- Fittings and clamps
- 3 мин чтения
How to Select the Appropriate Pressure Rating for Flanged Sight Glasses
When selecting the appropriate pressure rating for a sight glass, the core principle is that the sight glass's design pressure must exceed the system's maximum operating pressure, while allowing for an adequate safety margin.